2003 Chevrolet TrailBlazer "replacing transmission cooler lines" Questions

...transmission cooler line on 2003 chevy trailblazer YOU NEED A DISCONNECT TOOL TO RELEASE THE LINE FROM THE FITTING, THE ORING IS REPLACEABLE BUT IT IS PAIN TO GET OUT OF THE FITTING. NAPA SELLS THE ...

...transmission cooler lines are now (thanks to GM), make your own. I know that your fittings are tapered, and you may wonder how to do so, but the dealer sells adapter fittings, that you can replace in ...

...transmission fluid from lines lines can often be repaired using compression fittings and a new section to replace the failed part. Emergency repairs can me made by using a section of high pressure ...

transmission lines First up have some blanking plugs handy to put on the fittings you remove the hoses from on the tranny. Will save a lot of mess and oil There may be oil to the cooler so be prepared

...transmission fluid in my 2004 Chevy Trailblazer. This tranny has approximately 13 quarts of fluid. Just dropping the pan and replacing the filter will yield about 5 quarts or so, with the balance ...

...transmission oil cooler using J45096. Refer to SI "Automatic Transmission Oil Cooler Flushing and Flow Test" for the procedure. Full sized trucks and utilities should have the shift cable properly ...

...Transmission Cooler Lines 2001-06 ... ? 5:45 https://www.youtube.com/watch?v=SFEXmxxBMK8 Oct 31, 2013 - Uploaded by 1A Auto Parts How To Install Replace Transmission Cooler Lines 2001-06 ... In this ...

...replacing transmission lines,from transmission to cooler from cooler to rad cooler,back to transmission. do you have a schematic? thanks rick I dont have a schematic rick but I can help you. run a ...

...transmission fluid cooler, during the cold weather in a pinch, a replacement transmission hose with 2 clamps can be connected between the 2 transmission lines to correct leakage, but in warm weather, ...

...transmission cooler lines are rotted out, and need to replace them. Is it a hard Job? Do you need to replace the tube connections and the oil cooling rad as well. Its fairly easy, you dont have to ...