2003 Chevrolet Impala "replace wiper arm" Questions

...wiper arm are still there if not you might need to replace one or both of the components,if they look good then reinstall the passenger wiper arm and make sure the arm is as close to the position of ...

...off. turn ignition off if wiper motor is good it should put spline in off position and now all you need to do is replace wiper arms in the correct position they would be in when wipers are turned ...

replace the wiper crank arm that is bolted to the wiper motor. Then you need to bend the tab back up that got bent on the wiper motor bracket that the old crank arm bent. The crank arm has to hit this

...the small nut at the base of the wiper arm (pivot area) came loose, if it doesn't have a nut to tighten with a wrench, the splines are stripped out and you'll need to replace the wiper arm

...replace the wiper motor bracket. It will be necessary to transfer the following parts listed below to the new bracket. ^ Wiper transmission ^ Wiper motor crank arm ^ Wiper motor 1. Remove the ...

...wiper arms and plastic cowl to access the motor and either bend the pawl back, or replace it...once the arms and cowl are off, have a helper turn the wipers on, then off, you'll see the bent pawl ...

replace bracket, big job) Then cycle the wiper and you will see the assembly return to park position. Re-install all parts in reverse order. Hope this works for you. Windshield wiper arms are about to

...the switch is moved to off position. so one of the connector wires keeps power to the wiper motor whenever the ignition is on. There is a fault in your wiper motor, someone will have to replace ...

replace the wiper arm. There is an excellent YouTube clip on this simple repair below. You-Tube video "b5mh-OrFdnc" placeholder (do not delete) You-Tube video "b5mh-OrFdnc" placeholder (do not delete)

...wiper arm, pop off the plastic cover at the pivot point of the arm. Underneath, there is a nut. Loosen the nut a little. Wiggle the arm while pushing the arm down. Hold arm in place and tighten the ...