2003 Chevrolet Impala "program body control module" Questions

...body control module problem, they fail quite frequently on those cars. You first need to check the battery and the connections if you have not done so already. If that is ok then the next step would ...

...switch faults are common. You need to scan the Body Control Module (BCM) to see why the light was turned on. If the ignition switch is replaced the BCM has to be programmed to accept the new

...blinking and ac not working It is the body control module -- it is a common problem and is located under the left side kick panel; has three connectors on it - will need to be programmed if

...Body Control Module (BCM). This is a weak spot on many GM products. A new BCM for an Impala should cost about $230, plan on another $200 for the diagnosis, replacment, and programming. The dealers ...

body control module causing the clicking. I would have to say that the BCM is your problem. This unit will need to be programmed at the dealer and you need to replace it with new one for everything in

...body control module (BCM) energizes the park lamp relay, current flows from the park lamp relay switched contacts through the REAR PARK LP fuse to the I/P dimming switch. When dimming is selected, by ...

...body control module problem. Here is a wiring schematic of this system. These are the wires that control the on and off of the radio and instrument cluster. As I stated, these wires just transmit a ...

...body control module (BCM). When the ignition is first turned ON, the BCM sends a programmed theft deterrent password to the PCM. The PCM acknowledges the password and responds to the BCM that normal ...

Body Control Module (BCM). Initially, the Security light will come on then go off, progressing to a constant on light, before the car will refuse to start. Other symptoms may include erratic action of

...body control module Where is it located If you want to know where it is located it is mounted on the drivers side kick panel. It is a box with three harnesses attached to it. If replaced, it must be ...