2003 Chevrolet Impala "aligning timing marks" Questions

Ad

to 1500 rpms. Set the timing light to 32 degrees and adjust distributor until the marks on the harmonic balancer and the zere mark on the tab align. Tighten distrubutor clamp and recheck one more time

Ad

Question about Chevrolet Impala

1 Answer

...piston come up then you can use a wrench at the harmonic balancer to put piston at btdc (Before Top Dead Center)and see if the timing marks are aligned if not then you know the engine is out of ...

Ad

...aligning the timing marks, use a wrench to turn the camshaft drive gear pulley, then set the timing mark between timing belt and camshaft drive gear pulley and put the timing belt on the camshaft ...

Question about Chevrolet Impala

1 Answer

...align the left cam pulley ?I? mark and the right cam pulley on the ?E? mark. WARNING When aligning the timing marks, do not turn the timing gear counterclockwise. Damage to the engine will

...timing marks line up. There are three timing chains on these engines. On my Sorento even after the timing marks have been set and the engine is rotated by hand, after numerous revolutions the timing ...

Question about Chevrolet Impala

1 Answer

...timing marks, 1997 ford escort where are they? Ford Escort/Tracer 1991-1999 Repair Guide REMOVAL & INSTALLATION 1.8L Engine (see Figures 1, 2, 3 and 4) Disconnect the negative battery cable. ...

marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation. 4.Ensure all sprockets and idler pulleys

marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation. 4.Ensure all sprockets and idler pulleys

...timing marks for the belt so i hope this helps The timing should have been aligned to position #1 cylinder at the top of the compression stroke with the timing mark on the crankshaft pully pointed at ...

...Timing marks are located on the camshaft pulleys as shown-1.8L engines Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned-1.8L engines Fig. 3: ...

Not finding what you are looking for?
2003 Chevrolet Impala Logo

3,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...