2001 Chevrolet Blazer "size wrench fan clutch" Questions

...size, because rather than break out all my wrenches, I just grabbed an 18 inch crescent wrench. Place the wrench on the nut and tap loose with a hammer. the tapping will break it loose. You have to ...

...size, because rather than break out all my wrenches, I just grabbed an 18 inch crescent wrench. Place the wrench on the nut and tap loose with a hammer. The tapping will break it loose. You have to ...

...Fan clutch removal Are you sure the clutch has left hand threads? If the water pump pulley is not grooved, the water pump is turning in opposite direction of the crankshaft pulley, and should have ...

size crescent wrench. In a hurry you can use an air hammer on an edge (of the nut) going counterclockwise, they also make a neat tool that does basically the same thing, might take a few tries but you

...wrench to grip the big hex to unscrew the fan from the water pump. Important! It is left-handed thread. I bought a very narrow adjustable wrench just for this task. I think you will need to at least ...

...wrench to get that "fan nut" loose. Not sure if this model is the one that the fan nut is a left hand thread or not...but leverage can sometimes be obtained by using a prybar across the fan clutch ...

...size engine? do you mean fan blade? all of them facing vehicle will be remove turning wrench to the left side or to the right side of vehicle but you must hold pump pulley with spacial tool and ...

...wrench and a few sockets. You will need a flathead screwdriver as well. you are going to need a size 10,12,14,17 and depending on if you have a fan clutch you have to have a long chisel and a hammer ...

...Fan if metal or if other than flawless plastic T'stat and t'stat seal Mounting screws (aka bolts) if second replacement and up. AC hose tie strap (if original damaged) Tools: sockets per screw and ...

...size to unfasten and lift the drive belts away. Clear any accessories or clutter out of the path of the water pump. To access the water pump, you may also need to remove your engine's pulley, fan ...