Question about Chevrolet Blazer
...license plate light went out i replaced bulbs problem still there what is the fuse labeled for that circuit? Check the brake bulb socket for short , clean replace bulbs , check connector to rear ...
...replace the license plate light bulbs on a 2002 Cadillac STS? Hi there, There are two bulb containers above the license plate light and you just need a small screw driver to press in under the left ...
...license plate fuse on a 2000 Chevy Blazer. I replaced the bulbs but they still do not work. They are on the same fuse as the parking lights. If they work, start looking for bad wiring, or corroded ...
replace license plate bulbs for the first time. How is the best way? Buyu yourself the Chilton's or Haynes Maintenance Repair Manual...ask the parts clerk for help on purchasing the correct bulb. Very
...license plate (left) bulb is out. How do I replace it? all the mounting bolts are inside the door. open rear hatch and remove the mouldings and trim to reveal the mounts then have at it. bring the ...
license plate light replace bulbs ( how ) They twist in and out from the back of bumper. Pull the bulb socket out of light fixture, twist out the bulb and install new ones.
1995 gmc jimmy license plate bulb replacement does a b1995 s10 blazier come from factory with a tag light
License plate lights are not working due to a wiring issue. Not 100% but think it happened when some one hooked a trailer up to my blazer. check fuse did you test power to harness with tag light on ...
plate not working. Both bulbs blew. I replaced them but they still do not work. Tail and brake lights work fine. check for power to the bulbs with a test light on the wire for the license light.if you
2,609 questions posted
Usually answered in minutes!
2,307 Questions
1,647 Questions
1,619 Questions
1,503 Questions
982 Questions