2001 Chevrolet Blazer "remove battery" Questions

Ad

...remove key from ignition. battery is dead tried to start blazer nothing, no inside lights, nothing. then tried to remove key couldn't turn key back to off position and remove. Thanks Stranded If the ...

Ad

Question about Chevrolet Blazer

1 Answer

...battery (remove the caps) Once secure, connect the negative cable to the battery (be very careful not to touch anything metal) IMPORTANT: Make sure the Positve cable is connected tot eh Positeve ...

Ad

Question about Chevrolet Blazer

1 Answer

...remove and clean at least the battery clamps and terminals. If this doesn't help, then it's time to get really dirty, remove the negative cable (you should be able to see if it is grounded to the ...

Question about Chevrolet Blazer

1 Answer

...battery. Remove the serpentine belt, remove the electrical connection to the alternator then remove the bolts, you may have to have the original pulley removed and then reinstalled on the new ...

...remove the key, unplug any accessories from the 12 volt (cigarette) outlets, and disable the under hood light if equipped. Disconnect the negative battery cable from the battery. Install your amp ...

My dome light wouldn't shut off, removed fuse, but battery still keeps dying A Battery "DRAW" Test Should be Performed. TOOL:: >With A 12 Volt Test Light Disconnect GROUND Cable @ Battery, Connect ...

Question about Chevrolet Blazer

2 Answers

...battery) disconnect small wire(s) on solenoid (from ignition) remove bolts holding starter in place. remove starter sorry i cannot be more specific without car details but this sequence will work on ...

Question about Chevrolet Blazer

1 Answer

...battery 2. Remove the hold down bar / bracket. There are three fasteners on it. One on the fender, one on the rad frame and one on the T-Shaped part at the base of the battery which is a nut with a ...

battery before you remove the starter. Th remove the starter disconnect the 2 wires going to the lugs on the starter and there are usually 2 bolto holding the starter top the engine. Remove the bottom

...makes the clamp grab the terminal before it goes all the way on. You can now remove the wires from the battery and clamps, loosen the clamps and, without removing them, fit them correctly. Good

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

2,609 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...