1996 Buick Riviera "replaced serpentine belt" Questions

serpentine belt replacement where can i find a diagram for replacing a serpentine belt on a 1996 buick riveria? need to see diagram for serpentine belt installation on 19991 buick lasabre

...SERPENTINE BELT ON A 1995 BUICK RIVIERA SUPERCHARGED SERIES 1. DO I HAVE TO REMOVE THE TORQUE AXLE BOLT DO I HAVE TO TAKE OUT THE TORQUE AXLE BOLT TO THE MOTOR MOUNT TO REPLACE THE SERPETINE BELT ON ...

...serpentine belt that has stopped rotating? My serpentine belt is causing a loud screech while the engine is running. The noise increases slightly while accelerating. I looked at the belt and one of ...

serpentine belt on a 3800 supercharger there should be a decal under the hood somewhere that shows the belt routing. if its gone you can probably go to the library and find a book of your car that ...

...Serpentine belt has burned off due to one of the pulleys locking up. Do I need to replace just the individual pulley or is there a larger part I need to replace? I had recently replaced the belt due ...

Serpentine Belt What is the routing diagram for the serpentine belt for a 1995 buick riviera SC? Generally there is a sticker under the hood, showing belt routing. If not, get a cheap (usually under ...

...serpentine belt. The motor mount must be loosened and the engine need to be lifted slightly to accomplish the replacement. Not good engineering on this model year. It should be a serpentine belt (one ...

...serpentine belt on 1996 Riviera Need advice on how to replace accessory serpentine belt on 1996 Riviera. The supercharged 3800 engine uses two accessory drive belts. The outer belt drives the ...

...replaced crank senor & cam senor Hello There Sorry to hear that. Did you make sure to align the crankshaft sensor properly? I own a Buick Park Avenue with the same engine as the Riviera (except ...

serpentine belt Replaced oil filter --problem persists. No tubes appear to be leaking. If it's the crankshaft oil seal -- how expensive is it to replace it? It's probably not the crankshaft seal. It's