...distributor cap Firing order is 1-8-4-3-6-5-7-2. Move #1 cylinder to where piston is up, and on the compression stroke (TDC). Easiest way to do this is with a compression tester on the #1 cylinder - ...
...distributor cap and rotor button? Are there special tools required to remove the above items? If so, what are they? no special tools. phillips screwdriver is all you need. critical part is getting ...
...plugs? I don't quite understand what's going on. Please help. TRY DOING A COMPLETE TUNE-UP! PLUGS, WIRES, ROTOR AND DISTRIBUTOR CAP! BE SURE THE PLUGS ARE GAPPED PROPERLY! USUALLY ABOUT
...distributor, cap and rotor button,IAC valve, throttle position sensor, ignition module,coil Have you cleaned the intake manifold, you can get this at an auto supply store, sometimes deposits build up ...
...distributor cap and rotor and wires...any ideas? something im missing besides just a tune up I hope. it only has 104,000 mi on the car still in great shape. as for the tranny get new. rebuilt will ...
...distributor and rotor,my fuel filter and now my car sounds worse than before.It was stalling and not wanting to run when it got warm and would spit and spatter until it sat and cooled down then I ...
...distributor cap, could it be the throtle positioning sensor? Sounds like throttle position sensor to me. It will let engine go dead instead of maintaining an idle rpm. Try disconnecting battery,and ...
...distributor cap on a opti-spark ignition. You have to remove the water-pump to remove the cap and rotor, it is driven of the end of the camshaft. Is there some info you need on this or just for me to ...
distributor Yes. Roll the engine over onto #1 cylinder TDC and remove the distubuter cap. Place a mark on the body of the distributer inline with the rotor point before you do anything else. This mark
452 questions posted
Usually answered in minutes!
186 Questions
155 Questions
158 Questions
155 Questions
23 Questions