2001 BMW 5 Series "positive jumper cable connection" Questions

Ad

...positive connection under the hood that is normally used for jump starting the car. Use jumper cables to power that connection and an engine ground from another car. That will power the car's ...

Ad

...jumper leads one to the chassis and the positive to the starter motor terminal feed ,something clicks here ??but my memory has faded a bit ,iam sure that somewhere on the rear of the vehicle is a ...

Ad

Question about BMW X5 Series

1 Answer

jumper cable connections under the hood to keep the car powered while you are changing the battery. Battery shops have 12V batteries on cigarette lighter plugs that they use to keep cars powered while

Question about BMW X5 Series

1 Answer

positive jumper cable to positive terminal on your car, then, put the other positive jumper cable to the car that's jumper car and last connect the other negative jumper cable to the jumer cars engine

...jumper battery to the positive feed (thats the cable that comes from your vehicles battery) on the stater motor. using the negative jumper cable side, earth the jumper battery on the gearbox or ...

saftey and so you don't short the jumper cables to ground. You risk frying all sorts of things on a car if the positive and ground jumper cables touch each other - not to mention a lot of angry sparks

...jumper cables to jumpstart my 96 xj6 put the positive ( red ) cable to the positive (+) terminal on the battery and the negative (black) to the negative (-) on the battery and do the same with the ...

jumper cables right onto the existing battery connections. Connect positive + to positive and negative - to negative which is parallel wiring. Now remove the connections from the battery you are going

positive cable to jumper battery and attempt to start the car if same conditions then the xonnections may either be loose or corrosion hampering voltage to be supplied efficiently! A digital voltmeter

Question about BMW X5 Series

1 Answer

...wire from the solenoid-activator connection. Carefully jumper this wire directly to the starter positive post. The starter should spin firmly, and the starter drive-gear forcefully extend.

Not finding what you are looking for?
2001 BMW 5 Series Logo

837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2005 BMW X5
2005 BMW X5

528 Questions

2002 BMW 5 Series
2002 BMW 5 Series

369 Questions

2003 BMW 5 Series
2003 BMW 5 Series

270 Questions

2004 BMW 5 Series
2004 BMW 5 Series

230 Questions

1995 BMW 5 Series
1995 BMW 5 Series

171 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...