2000 BMW 3 Series "3 poor low" Questions

Ad

low speeds on poor surfaces, it tends to follow the contours. It has had new wishbones and rack and been aligned and cambered ,what else could it be ? REgards Andrew Bishop change the ball joints &

Ad

...poor engine response cold better hot but low power on take off check gig flexi hose between air mass meter and engine, it has a tendency to split, also try disconnecting air mass meter plug, if it ...

Ad

Question about BMW X3 Series

1 Answer

low/poor idle engine ticking over revs in idle very low,rev counter will shoot up and down revs up on its own. Changed air flow meter no change Here is what you need to do, a cleaning of the intake ...

Question about BMW X3 Series

2 Answers

poor gas, or intake and exhaust vanos solenoids, first try filling the tank with high test gas with low ethenol content,run through a couple of tanks, if still occuring your solenoids may be gummed up

Question about BMW X3 Series

1 Answer

BMW 320TDI HARD TO START WHEN WARM I have a 320 BMW tdi se E46 2002 .IT WILL START FROM COLD OK, BUT AFTER THE ENGINE HAS WARMED UP, AND THE ENGINE IS SWITCHED OFF(STOPPING FOR FUEL ETC)THE CAR WILL ...

Question about BMW X3 Series

2 Answers

...3 - Poor electrical connection ---------------------------- P2138 - APP Sensor Performance Condition Fault Probable Causes: 1 - Failed APP Sensor 2 - Open or short circuit condition 3 - Poor ...

...Poor Connections in Wiring Systems Go to Step 3 3 Is only one low beam headlamp inoperative? Go to Step 12 Go to Step 4 4 Disconnect the body control module (BCM) connector C1. Connect a jumper ...

...3 Inspect for poor connections at the harness connector of the headlamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find ...

Question about Cars & Trucks

1 Answer

...3 circuit poor electrical connection - Faulty fuel injector - Faulty Engine Control Module (ECM) When is the code detected?The P0203 is set if the Engine Control Module (ECM)  detects a low or ...

...3 plug or coil... switch those also and see if code change.. if it persist try the next thing.. I would try trading fuel injector 4 to 5 and putting 5 into 4 and see which code you get..... Faulty ...

Not finding what you are looking for?
2000 BMW 3 Series Logo

945 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1994 BMW 3 Series
1994 BMW 3 Series

526 Questions

2006 BMW 3 Series
2006 BMW 3 Series

285 Questions

2004 BMW 3 Series
2004 BMW 3 Series

276 Questions

2002 BMW 3 Series
2002 BMW 3 Series

230 Questions

1993 BMW 3 Series
1993 BMW 3 Series

190 Questions

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...