1994 BMW 3 Series "cam position sensor" Questions

long crank rough running fuel pressure, ignition system,map sensor,throttle position sensor,timing,valves,crank sensor, cam sensor, compression 

cam position sensor location Code engine bay on cam shaft pulley

...cam sensor. We place d on machine it give the following codes 12 - Exhaust Position Sensor A8 - Coolant Thermostat jammed open What do I change? Go with the thermostat first. If thermostat remains ...

...Cam sensors can fail eventually due to the thermal cycling of the engine. Just rereading your explanation I also wonder about the idle air control motor/valve, that and the throttle position sensor. ...

...position 2 before ignition when all lights should be on. It takes about 8 tries and 15 minutes for it to get going. Any suggestions? Already changed x2 cam shaft sensors, changed disa valve and ...

...cam position sensor intermittent 0340 cam position sensor failure I would replace the cam position sensor from the codes you provided. The knock sensor would most likely be related to the sensor ...

...cam position sensor I see Oil in the cam position sensor port Took the vehicle to auto zone and coded engine light, threw code P0011....cam position sensor. replaced cam position sensor, noticed some ...

...cam shaft position sensor? PCM= Powertrain Control Module. It is the brains of the car, it reads the sensor in put from all sensors including the cam shaft position sensor PCM , power control module, ...

...cam crank" sensor is the "reader" for position and speed of the camshaft. This sensor send informations to Engine Control Unit about camshaft position and speed. If the sensor is faulty engine stops! ...

...cam sensor OEM Japanese Denso, Made in China or Made in Mexico? Never go cheap on sensors. DTC P0348 stands for Camshaft Position Sensor "A" Circuit High Bank 2. This code triggers when the signal ...