1992 BMW 3 Series "head gasket" Questions

...head gasket at first but eliminated that after the combination of these two faults causing fluid loss. anybody else had similar experience of these mechanical problems? the car is a w reg. why ...

...head gasket on BMW 323i need to replace cylinder head gasket on BMW 323i have a look around here http://www.steelseal.co.uk/head-gasket-repair/how-to-repair-a-head-gasket There are a lot of tutorials ...

head gasket. When this happens the cooling system becomes pressurised by the exhaust gases. To check if your radiator is blocked, run the engine until it is hot. The coolant goes into the radiator via

head gasket exists, or a cracked block or head. Usually, it's just a head gasket. Good luck on this repair. Check to see if the coolant level is low, if so you may have coolant going through the motor

HEAD GASKET. CHECK YOUR ENGINE OIL IF IT HAS WATER IN IT OR IF WATER IS LEAKING OUT OF TAIL MUFFLER ITS A CRACKED HEAD. IF NOT ITS HEAD GASKET. ANOTHER THING WHICH COULD BE IS FIRST MAKE SURE THAT THE

...head gasket but it still has the same problem, it however is not overheating have coolant system pressure test.what they do is pressurize your coolant.about 14 psi look in radiator for bubbles if so ...

...head gasket is completely blown and undriveable. What are the chances of me finding a mechanic to do the job on such an old car and how much would it run me? Thanks! head gasket repairs will cost you ...

head gasket is blown,or it has a cracked head.If it was water it would be thick and light grey in color on the dip stick,But yellow indicates antifreeze leak that has not had time to mix with the oil.

... could it be the inside ratiator Definitely can be the radiator.... if not take second look at that head gasket look under cap for a creamish deposit, that one sign of coolant and oil mixing. Good ...

...and had a similar issue and the head gasket had to be changed.Is this something that they give trouble with Thank you David Butler have a compression test done to check for head gasket or cracked ...