1992 BMW 3 Series "head" Questions

...leak and orange oil light stays on briefly after starting up, also slight water leak. i suspected head gasket at first but eliminated that after the combination of these two faults causing fluid ...

...from behind transmission and engine running hot and compression is low SOUNDS LIKE YOU NEED A HEAD JOB. CRACKED HEAD OR NEED A HEAD GASKET. CHECK YOUR ENGINE OIL IF IT HAS WATER IN IT OR IF ...

head bolt touqe settings head bolt touque settings for 1992 bmw 318i Tightening torques Do not reuse the bolts as they may be stretched. Cylinder head to engine block Stage 1: 32Ft-lbs Stage 2: ...

...smoke coming out of my exhaust White smoke indicates that a possible leak of antifreeze through the head gasket exists, or a cracked block or head. Usually, it's just a head gasket. Good luck on this ...

how to remove and install cylinder head gasket on BMW 323i need to replace cylinder head gasket on BMW 323i have a look around here ...

...Split hoses aren't uncommon. However, it could be due to either a radiator blockage or a cylinder head problem - which is allowing exhaust gases to find their way into the cooling system via a ...

...but noticed yellow milky oil on the engine oil cap. Is there any known issues with engine block, head, or gaskets? Known issues or not,It sounds like the head gasket is blown,or it has a cracked ...

Cylinder head torque settings Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36 BMW cylinder torque setting all models According to my service manual as follows. Cyl head to ...

i need head bolt specs for a 1992 bmw 325 i I presume you want torque setting. If so here is BMW 6 cylinder engine According to my manual as follows: cyl head to engine block stage 1 30nm(22ft-lb) ...

Thinking about buying a 1994 BMW 320i because i've always wanted a BMW, although the head gasket is completely blown and undriveable. What are the chances of me finding a mechanic to do the job on ...