2006 Mazda 6 "wreck car horn working" Questions

...horn was beeping and my trunk was open the keyless entry wasn't working. They determined that the body control module (GP7A-67-560D) was corroded and needs to be replaced. They quoted me approx $500 ...

...To test your horn, you can run a wire directly from your battery positve post to your horn's wire terminal. (The horn is grounded to the body of the car thru the bolt attached to the horn

... in the fuse box click but no horn sound is heard.I bought this truck used and I'm sure it has been wrecked before I bought it. I just want the dang horn to work. I can deal with the flashing airbag ...

...once in a while the horn relay is the culprit but mostly it is the horn pad, be careful of the air bag deploying...disconnect the air bag fuse before doing any work on the electrical inside the

...are sealed and can't be taken apart to clean--replacement is about the only recourse. (look in a wrecking yard for replacements) behind the ...

...failing. Nearly all electrical controls go to this on these vans. Best to purchase aused one from a wrecking yard. If my memory sereves me the BCM in located under the hood, drivers side by the fuse ...

...car as a repaired wreck.. and it has not worked since i have had it... not sure if it was ever replaced during repair... i have removed the front bumper and I can't find where it is supposed to be.. ...

...horn just stopped working on my 2001 subaru forester I am looking to trouble shoot the problem. And the Subaru web site is not cooperating. The most common failure for the horn circuit is a weak ...

...horn on my car stopped working after I nearly was in an accident (not my fault) and had to really lay on the horn and slammed my brakes on. It hasn't worked since. Could it be a fuse? I too am having ...

horn? You can go to a junkyard and get a new airbag for the car, it will have all of the connections in it to make it work. Depending on where you live, there are several u pull it places that will be