Question about Nissan Maxima
...ball joints included, replace power-steering fluid, but add some additive for this problem, to the power steering system, what ever you do will help, I hear this same problem with nissans alot
...power steering fluid to fill it with, if it does not help then you will have to pressure test the pump output and electric control valve to see if it's failing, if not then you have a rack and pinion ...
power steering pump has failed or the steering rack is defective, have the pump checked first the steering rack is very expensive to replace, at least $600 You can check your pump by disconnecting the
Question about Nissan Maxima
...power steering pump, and I thought that would help get the air out. But since I did this, the car seems to be running rough. When I let off the accelerator the car does not coast and seems to lose ...
Question about Nissan Maxima
...power steering pump changed and the problem is still the same. could it be a ball joint or idle arm, or possibly the steering box? Steering works fine sitting still or at low speeds. 1.It isn't a ...
...power steering liquid. check your power steering liquid reservoir if its still on the recommended level. if not, have your power steering assembly serviced. 2. busted ball joints. ball joints are ...
...noise can be either struts/shocks or ball joints.as for stiff steering can be either power steering. or ball joints.bad ball joints can make a banging moise and make it stiff when turnning the
...power steering has been giving me issues. a The power steering has been giving me issues. a few weeks ago I began to hearing a strange noise from under the hood when I was accelerating. A couple of ...
power steering problems (stiff steering wheel) I had my steering rack replaced and the problem went away for a short time. The mechanic thought it was the rack because there were dead spots when I ...
...power steering pump reservoir to see if its empty. if so, fill to specs. if the problem still exist, make sure the power steering belt is tight and is free spinning and the pulley is working as well. ...
659 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions