Question about GMC Sierra
oil pressure sending unit 2007 GMC Sierra located and what are the symptons when it's not working? oil pressure never went over 40, it had a sticky lifter, gauge went up to 65, next morning started ...
Question about GMC Sierra
oil pressure drop to zero when I pass another vehicle ? When driving normal oil gauge stays at 80. When I start up a hill and have to give it more gas and the passing gear kicks in the oil gauge drops
Oil pressure is pegged out, even when engine is off it stay above 80. There are no leaks or oil burning. could this just be the sending unit or the gauge. yes it could be and most likly is.
Oil pressure gauge goes to 80 and stays I changed my oil and when I started my vehicle the oil gauge went to 80 and it stays there while the vehicle is running. Another gauge needs to be connected to ...
oil pressure gauge stays at top, about 80 psi, is this normal i have a 2003 chevy s10, oil pressure gauge stay at about 80 psi, is this normal 80 is on the high side for those... possibly a sending ...
Question about Cars & Trucks
...oil pressure gauge was installed with sender 279A and operates. But it pretty much stays buried at 80 psi. It's a 1969 GTX 440. I either have a high volume oil pump or is there a gauge problem? 82474 ...
Question about GMC Sierra
Oil pressure gauge pegs to 80 when you turn on, Could this be the oil filter, pump or pressure gauge sensor? 80 pressure stays when driving. Had an oil change in July, but someone added an 4 quarts ...
...oil pressure gauge goes to 80 and stays there. Change oil pressure sending unit. This should clear your problem up. If you need assistance for removal and install I will be glad to help. You oil ...
oil pressure gage stays at 80 only goes to 0 when not running Oil pressure gage goes straight to 80psi when shut off truck goes to 0 does not move during driving Replace the oil pressure sending unit,
...oil pressure on the dash panel reads 80 then the vehicle cuts off (stops running) I start it up again then it start to jerk and the rpm stays low not in sequence with the speed and the oil gauge ...
721 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions