2005 GMC Sierra "4wd switch panel" Questions

4WD switch fuse keeps blowing The switch and the neutral safety switch are not the problem. A new fuse will hold until I put the transmission into gear and the battery and low fuel lights come on when

4 wd switch service, 4 wd . vehicle information panel, "service 4wd switch" It's stuck and wont change position Replace the 4wd switch it is located on top of the transfer case.

...4wd, a push of the button does not want to return the truck to 2wd. Many times requiring a restart of truck. Ocassionally the lights on buttons are out, then back on. I've heard of problem with the ...

...switch . The 4WD control module accomplishes shifts by interpreting inputs from the following: mode select switch (MSS) vehicle speed signal encoder plate position brake pedal switch digital ...

...4wd switch light not on 4wd not working. is it just a fuse to replace? wah tcould I do before I take it and have anything replace that would cost me less to do it myself, if it is easy. First check ...

...problems, but it sounds like your switch is doing what it's supposed to. One more thing, there is a 4wd control module, usually in the right kick panel. I'm betting on the shift motor

switch from 2wd to 4wd lo or hi it won't switch most of the time or if it does go into 4wd it doesn't want to switch back to 2wd. I have replaced the motor on the transfer case and the switches inside

...4wd switch but still does work and on the 4wd switch none of the lights come on to tell you if you are in 2wd or 4wd hi or low the switch is probably from a newer modle truck, although they work the ...

switch from 2WD to neither 4WD High or 4WD Low. little hint the switching of transfer case involves a vacume hose that is ran from the engine....let me know? these 4x4 units are controlled by a module

4wd when not needed. possible solution is to take out your dash control panel which has 2 screws . pull it out the radio and all will come out and check the wirer behind the switch. see if it is louse