2002 Volkswagen Jetta TDI "vw golf thermostat problems" Questions

...vw polo keeps overheating after 1 mile or 2 the fan dont come on in car thermostat reads hot but i felt the radiator and it was warm not hot any ideas could it be radiator or thermostat water pump ...

...vw citi golf 1 tem. gauge not working car dont over heat vw citi golf 1 tem. gauge not working car dont over heat It is likely the coolant is not reaching operating temperature, please verify the ...

...VW Golf (2001) is losing coolant through the overflow on the expansion tank? is this a blown head gasket or a faulty cap? Thanks. VW have a big problem with their plastic water pump so I would first ...

VW Golf water overflow tank been having problem w/ overheating then saw water leaking from overflow tank also fans not running like they should Does the fan turn freely in your hand? possibly a faulty

...VW Golf, What is this code telling me and what can do to eliminate this problem? this is a cooling system performance issue. You could get it diagnosed to be sure but 9 times out of 10 it a bad ...

...thermostat housing, also just a heads up, these had a problem when first made, according to the known fixes and problems with VW's the hoses corroded inside and started loosing water, this could be ...

VW Golf 1997 Where can I find it? my car is constantly heating up there is water in the tank, I notice a leak in the pump but it's not significant (yet) I am getting it replaced fans are turning on on

vw golf 2001. coolant system not working VW Golf GTi (115 BHP) Petrol 2001. Temperature gauge increases quickly despite short journey. Fan releases cold air only. Your most probable cause for this is ...

VW Golf 2.0 is overheating after replacing thermostat. Yesterday, my 2.0 overheated. I got it home, replaced the thermostat today, refilled the coolant, and it is STILL overheating. I have noticed ...

...vw golf 2000 having problems putting pipe and housing on vw golf 2000, any tips please Pull apart the hose and housing. Put the housing on, and tighten down. Then reinstall and tighten the hose onto ...