2001 Volkswagen Passat "limp mode" Questions

limp mode Taking shifting plate off to replace magnet on side of it and no magnet was found so want to know if that could be the problem limp mode is activated by the ECM to protect the engine and the

...limp mode? P1196 (o2 sensor 1 bank 1) and P1813 solenoid 1 electrical transmission) are the codes I get. the car runs fine but the turbo doesnt kick on.. I serviced the transmission same codes same ...

...limp mode due to an engine management fault. have to check what the fault is with a code reader. if the milage is high 100,000+ could be a turbo fault (overboosting), as this will put the car into ...

...limp home" mode: After scanning the Engine Control Module (ECM) with a VAG or similar diagnostic tool you will find this: Fault code: P1557-Turbo Boost pressure control exceeded 1. Engine stopped and ...

...Limp-Home' mode Limp home is a protective override, this means the ECU has detected something potentially fatal to the engine. *DON'T PANIC* Because it is now in that mode you are safe but it will ...

...limp home mode. The APP or throttle control uses to angle sensor when one sensor does not report it goes to limp home mode.The ECM cross checks the throttle angle so one is off. The late module ...

...limp mode and saying emissions workshop. Can anybody help My car starts no problem but says emission work shop and is in limp mode I turn it off then back on and it drives fine but still saying ...

how do i rest limp mode to get my 2005 passat Hi.if it goes into limp mode there must be a fault best get it scanned at your local workshop for faults

limp home" mode!!! After scan the EDC-15P engine control unit with a VAS, VAG or KTS -BOSCH diagnosis tool you will find this: Fault code: P1557-Turbo Boost pressure control exceeded 1. Engine stopped

...limp home mode for quite a while now what i notice most is that there is severe turbo lag until 2000rpm in 3rd 4th and 5th and once i hit 3500rpm in 4th and less in 5th it goes into limp mode also ...