Question about Volkswagen Jetta
...timing belt and water pump in and can't get this to work. I have the distributer off as well and its lined up to be at TDC also. try it and see .. get a printout of the timing marks from the parts ...
Timing belt was very loose so i changed the timing belt tensioner pulley.I tried to make sure and not move the timing belts position on the cam and crank but now im not sure if it may have moved.I ...
...timing gears for a 1987 Jetta 1.8 8V. Remove tappet cover and turn engine till the lobes on the cam shaft at no.1 cylinder are facing upwards and not pushing on the lifters.The cam gear has a little ...
Question about Volkswagen Jetta
belt right ,how long was down ,battery need charge . your timing is off, you'll have to reset it. unfortunately it is going to reqire that you remove everything you just got back together and doing it
timing belt went on a 1980 vw gas pickup. cant find a mark on the crank pully or the notch like the book says. is there a different way? You can remove the #1 spark plug and get the piston at top dead
...timing belt because they're in the same location. I did change them on my 1991 Accord after the bearing in the pump went. Thank goodness the belt didn't break and mess up the valves.These two ...
Question about Volkswagen Jetta
...timing belt covers and turn the crank to TDC ( top dead center) look at your cam timing marks ill bet they aren't exactly where they should be. Line those up and erase those trouble codes and reset ...
...timing belt on and the tensioner set correct? If so, just rotate the crankshaft around until the notch on the crank sprocket is lined up with the pointer on the oil puimp housing (TDC). ...
...timing belt on my daughter's 95 Corolla and was wondering what I need to align where before removing the belt eg How do I find TDC? Camshaft pulley and Crankshaft pulley alignment? TDC is top dead ...
...timing belt, how do you know when # 1 is at TDC with both intake and exhaust valves closed? What is TDC? TDC is an acronym for Top Dead Center. It is when the piston has reached the very top of its ...
1,254 questions posted
Usually answered in minutes!
1,072 Questions
1,150 Questions
968 Questions
1,003 Questions
917 Questions