2006 Pontiac G6 "crank spark" Questions

...crank sensors or what is the most common fix P0017 - Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B) The crankshaft position sensor (CKP) and Camshaft position sensor (CMP) work ...

1996 sierra vortec 350.engine cranks but wont start.acts like it trys to fire when you let off key First thing I would check on a GM brand truck that wont start is the fuel pressure. Many parts stores

...do is crank over ok but would not start 84000 miles never had problem starting, car was running fine shut off twice went to start later all it did was crankover Are you getting spark to

...and see if pcm is firing the fuel injector noid light should  blink when cranking the engine.if light steady pcm not firing 2 fuel injector,if noid light dont light ...

...crank, until the battery dies and it will never start.Since you said you used a boost, sometimes it will help if the battery is the ONLY problem.  You need to get a can of starting fluid and ...

...in real shop the do 1,2,3 and then using a real fuel pressure gauge make sure it is at spec, PSI, cranked. need spec , ask 3.5L gas. the injector balance test is 55psi, in serv, man;/ on

...crank there is no spark , there will never be fueling. The starter is first. does it crank over the crank shaft fast. yes, i must guess. then next is spark, with no spark , EFI cuts fuel. (no ...

spark. then you need a crank position sensor  thank you ted REPLACING STARTER ON CAR THAT CRANKS BUT WONT START DOES NOTHING..CHECK FOR FUEL,BY SPRAYING STARTER FLUID IN T.BODY IF STARTS YOU KNOW

...spark plug hole and crank engine about 4 cycles compare readings to all cylinders reading should be around 125-150 psi readings in the 50 psi range possible jumped or broken timing belt. If engine is ...

...is good distributor Cap and rotor are brand new. fuses good< oops scan the PCM see errors cranking OMG it tells you why:? sure can. forgot the 6 new spark wire plug set, replaced 1 by one ...