1996 Pontiac Grand Am "replace motor mounts 3" Questions

...replace 1996 pontiac grand am motor mount On 96 Grand Am 2.4L you have to remove the motor mount first to get the top 2 transaxle bolts on the mount bracket removed. The bracket and trans mount are ...

...out the power window mounting rivets, removing and replacing the motor. I have a 96 grand am, and over the last 3 years I have had to change all 4 power window motors. Not the best quality

...motor to get at them and wants $150 to do it. The car stalls when if its wet out and after about 5-10 minutes once it warms up it runs great. Car has 82k miles on it should I just get a can of stuff ...

...replace only motor for inoperative complaints. Don?t replace entire sunroof module assembly. 03-08-67-009A Sunroof Will Not Open or close Completely (Replace Sunroof Motor) #03-08-67-009A - (Mar 8, ...

...motor Fig. 2: After disconnecting the wiring, remove the starter mounting bolts Fig. 3: When removing the starter, be sure to note the number and location of any shims Fig. 4: View of the starter ...

...motor mount, harmonic balancer, timing cover, timing chain tensioner, timing chain, exhaust manifold, upper exhaust pipe, etc. When you put it all back together, you have to make sure to properly ...

...motor and replace it with the new one. The new motor comes with it's own screws so use them to re-attach the new motor to the lifting arm, instead of rivits. Re-install the unit in the reverse order. ...

3 inch bolt for the front and a 5 to 6 inch bolt for the back.Look again under there one more time around the starter for a shim.Most of those cars have a shim that goes between the starter bolt holes

...motor mount was. Remove the two smaller bolts from each side of the rear of the sub-frame (total 4 bolts) and then loosen the two remaining larger bolts holding the rear of the sub-frame (these bolts ...

...replace to clear any corrosion off them. If it's the cooling fans at the front, these are controlled by a temperature switch which may be faulty. Locate it , and measure the conductivity between ...