...Knock Sensor. You can get a Haynes repair manual from Advanced auto that will explain how to test these items. Good Luck. the water might be coming from the water pump and if is it is possble the ...
...knock sensor issue (well known fault on 3.0). my cam sensor ohm checks good. my crank sensor shows 573 and a second one i picked up shows 566 (range is 470 to 570). is this my problem or am i missing ...
knock sensor code was set and due to illness was parked and never touched/run for about 3 years. Knock sensor code was only issue in the beginning after it sat for 3 years several thing had to be done
...sensor or distributor and if u have a distributor then look at ur coil (not to be confused with a coil pack) and i also have to ask has there been anywork with the timing lately (timing belt, water ...
...issues we replaced the thermostat the water pump and my dad had to fix some knocking I think he said it was a sensor issue but it's continually runs hot maxes out on H and we cannot tell where the ...
...knock sensor is detecting the knock you mentioned and is trying to retard the timing to fix it . In doing so it has retarded it to far causing the engine to loose power and eventually stall. I would ...
Question about Cars & Trucks
...no inertia switch --why did you change radiator --if really overheated bad the water pump is in with timing chain area may have skipped a tooth --replacing radiator knocked loose a sensor or ...
...sensor but still tends to overheat. The car sometimes does not want to start and the temp gauge jumps to the H when i turn on the ignition, and there is no juice in car. I mess with the automatic ...
Question about Pontiac Grand Am
...shows no codes. Thank you. Your PSI is good on fuel. Not a pump problem. You should check vacuum to see if you have any issues there. Could be a number of sensor issues as
1,564 questions posted
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,285 Questions