1996 Pontiac Grand Am "hi side low port location" Questions

...Hi Pressure Line. The Low Pressure Service port is usually located by the passenger side fender well next or on top of the filter/receiver/dryer (a metal cylinder device). The Low and Hi pressure ...

...Hi .. I just ran into the same problem .. I have a 2000 Expedition with the 5.4L engine .. the low side port is located on the passenger side of engine compartment just below the black metal bracket ...

...Hi, the low side port is located on suction side near compressor , it can be identified as the larger of the two lines from compressor. Using eye protection and gloves hook can to hose, hook hose up ...

hi press will be very hot, follow the line from the ac pump on the engine and it will have a charge port in it either near the pump or near the the engine bulk head/fire wall. I hope this helps, if it

Hi, I am trying to re-charge my a/c in my ford. And I need help with figuring out which is the high and low service ports Your low side should have a "blue cap" on it. If it does not, it is located on

side. Not sure though. Hi, if the port you see is along the line that runs from the firewall to the compressor, then you have the right port. The high pressure port is a larger port, and your charging

...Hi .. I just ran into the same problem .. I have a 2000 Expedition with the 5.4L engine .. the low side port is located on the passenger side of engine compartment just below the black metal bracket ...

...Hi, there are two lines coming out of the compressor, one is larger than the other, the larger one is low pressure side or suction side for refrigerant , the port is in that line under a cap , ...

...side service port. Good luck. hi the easyest way to find the line where you put it in is if you look at the front of your car where the radiator is and look at the botom of you should see 2 aluminium ...

...side a/c service port located? Hi, the low-pressure service port is on the line that goes from the firewall to the compressor. There should be a blue or black threaded cap on it. Just unscrew the cap ...