1996 Pontiac Grand Am "blinking light oil" Questions

light blinks press again, should stop blinking and the chimes will stop, hope this helps To reset the "Change Oil LIght" the procedure is as follows: Turn the ignition to the "ON" position. Press the

...oil light off I have a 2000 Grand Am GT and I have changed the oil and now my Change Oil light will not go off, what is the code? Turn the key to the on position and press the gas peddle down to the ...

...to blink. if not press it again. Once the change oil light is blinking press and hold the reset button for about 10 seconds. an audible tone will beep three or four times and the light will go

...blinking., Hasn't worked for me. [email protected] turn the key on, now floor the gas pedal 3 times. that should reset the light. Get out your owners manual and go to the part that shows you dash ...

...oil light after service turn your key on without starting it then in the fuse panel inside the driver door jam there is a red reset but push it till the oil cange light blinks then push and hold it ...

...local autozone and get a system scan, if the light is blinking you need to o this quic because the blinking means a problem that will cause catalytic converter failure which is about a 1200 buck ...

2001 grand am change oil reset light hold trip reset button in until change oil blinks and then goes out.

oil light is on two ways gm uses to reset the light, If you turn the key to accessory and push gas pedal to the floor three full times and hold the pedal down on the third, wait for oil light to blink

...oil light and my check tire pressure light . i just changed my oil and checked my tire pressure. everything is good. If you could help that would be awesome. Thanks....Matt turn the key to "on" and ...

...Oil Light 2003 Pontiac Grand Am, 2.2 liter Hello - I have a 2003 Grand Am GT and to reset my "Change Oil" light, I turn the ignition key to the on position (without starting the car) and fully press ...