Question about Oldsmobile Intrigue
stop light goes through first gear fine when it gets to second it feels like it loses power. rpms come up normally, exhaust sounds like it wants to backfire. error codes say possible misfire, possible
...scan it and detect a new code : P0302, its a misfiring in cylinder #2 , so changed the spark plugs , nothing change than the wires, than coils than injectors, I replaced all this but still misfiring ...
Question about Daewoo Cars & Trucks
stop) HOW TO DIAGNOSE IT, IS WHAT IS TO BE DONE AND THEN IF there are ON car cures, and above is my list. even 1 bad $1 seal deep inside a box can make it fail . The box service manual as huge list of
Question about Mazda Cars & Trucks
...gear. It's my understanding that it's the PCM because I've already replaced the filter, fluid and solenoids and nothing has worked thus far. WELL the service manual answers that. most cars after 1992 ...
Question about Chrysler Cars & Trucks
...all fuses then scan the PCm and stop gue$$ing. there are lots of tests in the shop manual 2nd gear stuck can be tranny limphome, and is begging you to scan it but do not? or ask a shop to diagnose
Question about Oldsmobile Intrigue
...stop. How do I fix this issue? Have to downshift into second gear to get good take off, and sometimes get stuck in a low gear. scan it yet? the a/t trans can go to limphome mode,, (electr shifted TCM ...
...on again then have it scanned and see what comes up always come to a complete stop when shifting from rev/drive or visa/versa banging into gear is a problem and does internal damage if this ...
Question about Ford Cars & Trucks
...scan it.? OD function. real name is 4th gear is overdriven so if the tranny stops at 3rd gear we say 4th gear is dead. 4th gear is 0.70: 1 ratio. engine spins 3/4 turn(near) and drive shift goes 1 ...
Question about Hyundai Cars & Trucks
...stop guessing. step 1 on all cars DIAGNOSE FIRST. (or go broke super fast) is check fuses first then scan the PCM for TCM errors. drive is dead can be simple, even bad shift cable. we do a physically ...
...Gear Shift Indicator lights stopped working 5. Engine revs high past 35mph on 1995 GMC SIERRA Truck you need to scan this truck if you have a vss input to the computer then you have a bad trans or a ...
485 questions posted
Usually answered in minutes!
988 Questions
829 Questions
835 Questions
385 Questions