2000 Oldsmobile Bravada "clunking noise rear differential" Questions

...rear end oil)but you can do that to it won't hurt had similar noise coimg from mine but dealer cost a lot more i had mine down at Jiffy Lube shop and made sure they did transfer case twivce because ...

...clunking noise from rear, right side A grinding noise suggests a bearing at fault or perhaps worn pads on the brake rotor. However, the clunking noise you mention could also point to a problem with ...

...noise comes from the rear underside of the differential. when pressing the gas pedal a clunk noise comes from either the trans or rear drive axle. it only made the noise when i put it in reverse but ...

...clunking rear end noise when i let off the throttle Check the U joints, there more common to go bad then the differential, unless you are low on differential fluids. You can take it to a drive line ...

loose or damaged muffler or heat shield can create a clunking noise when the vehicle is driven. It is recommended to get a proper inspection done by a mechanic to diagnose the exact cause of the noise

...clunking noise in the rear of the vehicle any help? thanks Clunking noise in the rear of the vehicle is a broad statement. When is the vehicle doing it? Is it all the time or just over bumps? Is it ...

...noise from the rear end. GET IT TO A MECHANIC!! Something is loose or about to collapse! Remember that vibration and noise can travel away from the source so get the mechanic to start in that ...

CLUNKING NOISE COMING FROM REAR AXLE PASSANGER SIDE SEAL LEAKING GROOVE WORN IN AXLE COULD THAT CAUSE THE CLUNKING NOISE 01 FORD F-150 you have a seal leak causing the differential oil to get onto the

...noise/feel in the rear end after taking off from a stop. Tonight a really bad grinding/clunking sound both in drive and reverse, ion gear or neutral. I've been reading online and a lot of talk ...

...clunking noise when driving, lessens when I press the brake Loud Noise Unknown Origin - Ask the GM Technician - GM-Trucks.com www.gm-trucks.com > ... > Ask the GM Technician Jun 30, 2006 - 7 posts - ...