1985 Oldsmobile Cutlass Supreme "not start" Questions

up sometimes not start then start with a jump i had the battery and alternator tested and both good and wont start at all You should contact Authorized Service Station for the Solution of this problem

...not start at all and I noticed the security light on the dash would not go off after I turned the key. It wound up being the ignition switch. I replaced it and no problems. The only trouble is that ...

not start. wait for awhile and it will start and run great. Got to be more and more of a problem and then would not start at all... let it set for a day or seven and then it starts. Possible PCV Valve

not start in the morning with the remote start. A week later the car stalled as I was driving home from work however it restarted immediately. Within 2 days the car would not start at all. Had the car

...not start. The battery is charged , and I can jump across the starter terminals and it turns over , but it will not turn over with the key. It will start by jumping the terminals , but then dies. It ...

...not start or turn over, headlights work We have had this problem for several months now, the car will not start. We have put the car in park and removed the keys upon exiting it. When we return, ...

start and if not feel free to contact me...Let me ask you,does the check engine light stay on while car is running and if so it may be a sensor failing ..and if not I would suggest the tuneup and fuel

start out in second gear, po1864 came up. what does this means Hi. P01864 means battery disconnected within last 50 starts. If this occurred occasionally, or just after disconnecting the battery, then

...not start. The car can be started after being jump started sometimes. Sometimes can't though. help i would check fuel pressure and injectors from what ur describing i said ur injectors r going ...

When the car does not want to start, gather all information possible (Have spark? Have gas?) It should start if you have those two unless you have compression or head gasket issues. I hope this helps