...the door panel off and remove the door lock and try and manipulate the wafers and get it to release the key. with the lock in hand use a small pin to try and move the wafers away from the key.
...key part of the lock partially seizes up and sticks, Try spraying oil (WD40) into the lock and work it with the key, keep spraying and working it, excess oil will go through the lock into the ...
lock all doors 2. Insert and remove the key from the ignition key cylinder more than six times within 10 seconds. (The hazard warning lamp will then flash.) NOTE: Key should be withdrawn from ignition
...key lock on drivers side. Will lock from inside manually but key will not lock or unlock door . The key turns but is not attached to anything. Part broke and missing? The is a bar that's runs up to ...
...you will need to remove the key lock from the drivers door as it has the key number on it, a locksmith will need the lock so that he or she can cut the new key to the numbers,hope this helps ...
My son has just bought a 1996 toyota camry. The seems to be a problem with the central locking, it is constantly locking and unlocking. Even with the key out. It keeps running the batter flat. Is ...
key no longer works on drivers door lock I have to door panel off, I can see the linkage that goes from the key block to??? I can't see how it's suppose to attach to the locking mechanism... help! Try
...key codes go to 1998. Without changing all the lock cylinders the cheapest easiest way would be to call a local locksmith to cut a new key. Generally $60-$80 and no need to remove the lock
...tun it. A lot of times you need to rotate the steering wheel a little while trying to turn the key to release the lock. This should then allow you to turn the key in the ignition. Hope this
574 questions posted
Usually answered in minutes!
716 Questions
599 Questions
586 Questions
405 Questions
397 Questions