...evo 6 how do i change a cambelt on an evo 6 u need to get the cama set right and engine locked u really need some 1 that knows what doing alot aof money if udo it wrong or u can try evo lancer ...
my mitsubishi evo as a running problem runs and cuts out engine managent light comes on and goes off nowwhen try start it back fires be greatfull with ay help as im lost Check all connectors, if I am ...
...engine locked up Will a broken serpentine belt make the engine on a 2004 Kia Amanti seem like it is locked up or is the engine really seized? Do you mean the timing belt, or the serpentine belt ? The ...
...engine locked up my mom was driving my 1993 chevy lumina 3.1 euro 2d for awhile and apparently didn't put any oil in it. I had 2 different mechanics tell me the engine locked up and there was nothing ...
Question about Cars & Trucks
2007 chevy 6.0 engine. I rebuilt the engine, everything great, got new crankshaft, now having a problem with the engine locking up Rebuilt the engine, put in new crankshaft.And now the engine is ...
...engine to be locked-up. A starter can be locked against the flywheel. The engine oil can be contaminated or broken down causing bearing failure. Excessive fuel in cylinders can lock an engine. Hope ...
2006 chevy cobalt how to tell if engine locked Put a socket and a breaker bar on the crankshaft and try to turn crankshaft if it turns engine is not locked no turn engine is locked
Question about Mitsubishi Lancer Evolution
...engine by hand until it locks into place . the 2 camshafts are locked by removing the two plates on the side of the camshaft casing (opposite side to the chain sprocket) . 2 special shaped locking ...
Question about Cars & Trucks
...engine and strip it down as not all locked engines are un- repairable ( depending on the reasons for the lock up). Next best bet is to get a good unit from a reputable wrecker or a reconditioned ...
engine locked up while it was parked???? It can happen. Usually caused from the oil being low or going low to many times. When it cools down, the bearing will seize on the crank shaft. Also seen the A
46 questions posted
Usually answered in minutes!
10 Questions
1 Questions
37 Questions
17 Questions