...tools are required to change the front wheel berings on my 2003 mitsubishi lancer those are sealed units and are intergrated with the wheel rotor if the bearings are bad they must be replaced and ...
...tools required? I've never heard a hub make a rattle noise. A bad hub bearing will usually make a roaring or whining noise at speed and/or it will have play in it. When is the rattle noise made, over ...
...front hub to replace u joints I had to remove the R/F hub assembly to replace the U-Joints -It requires a lot of force on the hub assembly generally requiring replacement of the hub assembly if it ...
...front brake rotor Your rotors have an integrated hub with serviceable bearing. Remove the six bolts around the center of the hub and pry off the grease cover. behind it you will find a locking wheel ...
front wheel hub assembly with the bearing pre-installed, they run about $100.00 each, to replace them requires no special tools, all u do is remove the wheel, the brake caliper and the brake rotor and
Question about Mitsubishi Lancer
front wheel hub on a 2003 honda civic? I broke a lug stud. How do I remove the wheel hub so I can replace it? I need to remove it. Answers on grinding the stud or knuckle don't work. Unfortunately the
...tools required ? is there a writen proceedure that I can follow ? Thanx so much. you need to remove the spindle assy from the truck & press the bearing out & in or you need to use a tool called the ...
...front driverside hub come off to get to the wheel bearings???? From what I can find out, the job requires a special tool to remove the hub, that only the dealerships have. I might add, there was a ...
tools. Raise and safely support the vehicle with jackstands. Place the jackstands under the frame so that the front suspension hangs freely. Remove the front tire. If a silicone (gray) boot is used on
...tools for this job!!!!! The vehicle will not engage in 4WD operation when the vehicle is off the ground, as the automatic locking front hubs require front wheel load to engage. When the hubs DO lock, ...
948 questions posted
Usually answered in minutes!
997 Questions
213 Questions
209 Questions
136 Questions
57 Questions