2003 Mitsubishi Lancer "replace alternator" Questions

i had the alternator replaced on my 2003 lancer I had the alternator replaced and now the srs light comes on and off through out the ride. the battery died when i got to the shop and this is the ...

...REPLACE ALTERNATOR ECM CONTROLLED YOU SUPPOSE TO ERASE CODE AFTER REPLACING THE ALTERNATOR. TRY THIS CHARGE BATTERY BACK UP.ERASE ECM CODE USING CODE SCANNER.THEN START THE ENGINE.IF ALTERNATOR OUT ...

...to Lit. I have checked the Fuse under the hood and found out the 7.5 amp fuse is blown, so i replaced the 7.5 fuse & keeps blowing. I checked with AutoZone and they said my Alternator (w/ ...

...replace the belt as required. To tighten the alternator belts all you need to do is push the alternator away from the front of the engine and tighten the belt as required. Once the belt is taut ...

replace alternator belt Locate the two belts on the left side (passenger side) of your Mitsubishi Lancer. The outer belt is a serpentine belt, operating four pulleys and the inner belt is your ...

...alternator to the battery runs under the radiator, and can get damaged. This wire runs into the main fuse box on the RHS engine bay. There's also an 80A fuse (BOLTED in place) in the fuse box. Check ...

Replacing alternator in 2002 Mitsubishi Lancer LS I can get the alternator off its housing, but removing it from the engine area itself without removing another part is almost impossible! Is there a ...

...a 2002 Mitsubishi Lancer ES....my ac has not been working for a while...but now after I recently replaced an alternator...two batteries have been ruined....eletrical checks of the alternator turn ...

I don't know if its a sensor problem or not. Battery died a few days ago, replaced it. Next day when driving, whenever I would stop or come to a stop, it would idle really low and die. Replaced the ...

...alternator is ok)such that battery does not get charged? New altenators will put out up to 14.7 volts. When they put out less than 12.0 it's time to replace them. Batteries should hold at least 12.0 ...