2003 Mitsubishi Lancer "hard starting" Questions

Hard start Car has a problem in starting every morning i would start by tuning it up with new plugs and wires. check that distributor as well for bad points.

my ck2 lancer hard starts and the engine check light lights up about 1 minute after startup, what is causing these problems [4g13 engine] its an injectors nozzles problem im sure of it might be dirty ...

It has a hard time starting (dead but I have lights) and will rev up to the redline in traffic or for no reason Idle contoll valve fault causing to rev up.

...hard tap sorta like the amount you hate it not starting. Closer inspection of ECU numbers informed me it was incorrect. First bet: give it a hard tap and try start or have a look at a new EMS if you ...

gear change problem Started finding it hard to get into first gear. FRom neutral have to go into second gear first then into first. There does not appear to be any clutch slippage. Could it be needing

...have mit lancer 2002. It idles a lil high and when u put it in gear it spits and sputters and has a hard time not dying. can u tell us what may be going on. We checked the fuel injectors wit a ohm ...

...hard to explane how to install a shifter but I would start by lifting the car then dissconned the shifter clip on the trans then they will be opening on the firewall you need to remove the rubber gar ...

car has in a fuel injected 1500 cc engine ,hard to start and uneven idle usually jump from 1500 to 3000 rpms when it should be idling You probably have a bad Idle Air Control Valve (IACV). If it does ...

but it still won't start No.: TSB-07-11-001 DATE: January, 2007 MODEL: 2002-07 Lancer 2.0L SUBJECT: HARD TO START ENGINE DTC P0340 (and P0335) PURPOSE The engine may be hard or impossible to start and

...NEED SOME ASSISTANCE...THE CAR WILL START BUT YOU HAVE TO PUSH IT ALL THE WAY IN AND TURN IT REALLY HARD JUST BY GOING TO THE START PART WILL NOT TURN THE CAR ON...HELP PLEASE Ignition switch is the ...