1994 Mitsubishi 3000GT "cold engine noise" Questions

...around the engine fully when its on a cold start hi my pejero jeep has a tapping noise coming from the tapped which gets louder as im driving ive taken the rocker of but cant see anything out of ...

cold. Then after its been warmed up the check engine light goes on. The fuel relay will starts making like clicking noises and the car dies. Once it dies the car don't really wanna start up. Sometimes

Engine noise cold I have a rattle type noise deep inside my engine when first started, it sounds like wrist pin or piston noise, goes away within 2-5 minutes, engine is an LT-1 with 60 miles, oil ...

engine on a cold start oil when cold is thicker hints why your noise in your engine what Lucas does is eliminate the dry start by the way my engine has 288,000 and does not use a drop of oil after you

...cold engine noise related to steering - goes away after few miles When starting a cold engine whatever is attached to the top pulley on the engine makes a high pitched noise which is louder when the ...

...engine to 5000 rpm when its cold, chances are the clicking noise is your valves. Cold oil will not get to the top end for proper lubrication until the engine warms up, and running at 5000 rpm with no ...

...cold ? The engine sounds like there is a muffler leak, but I've had it checked and there is not. The engine noise is normal and quiet when the engine is warmed up. could there be an open valve in the ...

...train noise. A dull tapping or slapping sound from the side of the engine block would point more toward piston slap.4 Nov 2011 Cold-start engine clicking is a nuisance, not a disaster - ...

...engine is cold Every time I start the engine when it is cold there is a noise from the belt I quess. When the engine warms up the noise disappears, what is the problem? worn belt or too loose/tight. ...

...engine is cold. Once engine warms up the noise goes away. Just had the fuel pump replaced and it did not solve the problem. any ideas? check for an exhaust leak or something loose onthe exhaust heat ...