...3 hatchback will only start in Neutral. I just bought a 2005 Mazda 3 hatchback. It will ONLY start in neutral. Dealer told me that is an anti-theft feature. True or not? Sort of... There is a safety ...
...3 4 door. I replaced the bulbs on both sides. Only one was actually blown and the other looked fine. I think it might be a fuse but the ones I checked look good. Any ideas?> My break lights work ...
Where is neutral safety switch located ? I need to replace it. Where isneutralsafety switch on 2006 honda accord?
...neutral safety switch is typically mounted to the transmission and sometimes can be bypassed, but not always - I had an old Dodge truck that the safety switch could not be bypassed. The ignition ...
...3, when I'm in neutral the idling jumps around a lot making the engine rev up and down, its running real rich and using up a lot of gas, and my check engine light is on. Could it be a fuel injection ...
Question about Honda Cars & Trucks
...replace Here's a link to a new part. ...
Question about Cars & Trucks
...replace our 3 wire well pump with a 2 wire pump. It starts up and then stops. Any ideas? A 3 phase motor replaced by a single phase motor has to be connected to phase one and neutral. You're going to ...
...3 / 32 in. (2.38mm) diameter pin in place. The switch is now aligned in Drive position. 1973 and later neutral safety switches have a shear-pin installed to aid in proper switch alignment so that ...
...replace the starter. If not.... 3. Check starter relay. If it is not clicking, replace it. If it is clicking.... 3. Put a pry bar and socket on the crank pulley bolt. If it won't move, you have a ...
Question about Mazda MAZDA3
...3 voltage circuit of the transfer case select switch for an open, a high resistance, or a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? ...
551 questions posted
Usually answered in minutes!
464 Questions
370 Questions
157 Questions
30 Questions
18 Questions