The turn signal flashing rate is controlled by the BCM in my '08 Mazda6. There is no separate signal flasher. I want to install LED signal lights but I know they will cause hyperblinking due to the ...
horn blows when turning on turn signal on 2007 mazda 6 horn comes on when I turn on right turn signal and stops blowing when I turn signal off must have a short in the wiring loom to the steering ...
My front left turn signal will not operate and I have replaced the bulb. All other light bulbs are working on the vehicle. The right side turn signal works fine.What do I need to check or replace? ...
Question about Mazda MAZDA6
what causes the driver side turn signal to stay on all the time the driver side turn signal stays on all the time will not flash stays on even with car not running It sounds like something wrong with ...
2008 mazda 6 - when I turn on my right turn signal, the flashers come on. The left turn signal works normally with no problems. Fuses looked ok and bulbs are good. Help please.... The single most ...
...the blue high beam light stays on can you tell me how to work the beam light? pull back on the turn signal lever, sometimes you have to push foreward too.. The turn signal stalk is supposed to turn ...
Question about Mazda MAZDA6
Turn signal lights don't work. when I go to use the signal lights they freeze, but don't flash Replace the flasher relay.
left turn signal My front driver side turn signal is out and I have lost my owners manual. So I can't find a fuse to check. Where if there is one would the fuse be found. all the turn signals are on ...
...its believed that to much fuel is being used crank and cam sensor can do that! crank gives computer signal to start the engine cam give computer signal to mix your fuel, air and ...
1,117 questions posted
Usually answered in minutes!
454 Questions
386 Questions
293 Questions
74 Questions
48 Questions