2004 Mazda 6 "gear overdrive third" Questions

a third gear change after having my 475 transmission rebuilt. Is there a third gear change at 45mph I assume it has overdrive, so yes it should go into lock-up at 40 then overdrive around 45 or 50 mph

...gear. Overdrive only drops rpm by a couple hundred. In third gears you should still be less than 3,000 rpm. Second gear is a default gear when the transmission is in limp mode. Is the check engine ...

...put the shifter in 4Th or overdrive.If your trans jumps hard between overdrive and 3rd gear or is always searching for a gear to be in you should be concerned and have it serviced.18 gallon

and tranny are hot(to get out particles that may be jamming the overdrive gear)! Next, check to see if the overdrive motor is running when you flip it to overdrive. If not...change the overdrive motor

...overdrive gear setting if your sensor is not kicking in then you are due for trans maintenance as 3rd gear is shredding slowly away learned this from dirt track quarter mile super stock racing pray ...

...gear, overdrive ring gear, coast clutch cylinder, overdrive one-way clutch assembly and the center shaft, as shown in the following illustration. The overdrive planet assembly is splined to the input ...

...overdrive, third gear, wait to start light (1996 dodge 3500 cummins turbo diesel 4x4) check fuse #9 in the fuse box for being blown or lacking power...if there is no power to the fuse it is possible ...

...not move shift to third gear it dose all other gears are fine just no overdrive changed range selector switch thats the code it had no other codes still have same problem change the overdrive ...

My automatic transmission is sticking from third to fourth gear Is this an overdrive trans or a lockup converter type trans? FIRST CHECK FUSES.

...overdrive gear. For normal driving, the selector lever should be left in the "D" position and the overdrive switch tumed on. If you need to accelerate rapidly, press the accelerator pedal all the way ...