2004 Mazda 6 "egr replace valve tube" Questions

Ad

Question about Mazda MAZDA6

1 Answer

...egr valve completely and the code still came back on, what do I do? Please help.... clueless. P0401 is a low egr flow code. It is rarely the EGR valve and more often than not the DPFE sensor that has ...

Ad

Question about Mazda MAZDA6

1 Answer

...replace egr valve in a 2005 dodge caravan REMOVAL - 2.4L The EGR valve and Electrical EGR Transducer are serviced as an assembly. Disconnect vacuum tube from electric EGR transducer. Inspect vacuum ...

Ad

Question about Mazda MAZDA6

1 Answer

replace egr valve on 2003 durango Should be lots of YouTube videos on how to do the repair. Hi thanks for your question' The electronic EGR valve and solenoid assembly is attached to the rear of the ...

...and check for exhaust leaks. Standing in front of car, on top of intake magafold, towards back of intake on top. Remove connector and 2 small bolts holding EGR valve, remove EGR valve and

Question about Mazda MAZDA6

1 Answer

...EGR Valve? A stuck open EGR Valve can cause a rough idle and almost make it cut off. Also, a vacuum leak on the EGR valve can cause a rough idle. Exhaust Gas Recirculation (EGR) ValveRemoval & ...

...replace it? Thanks! The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head , Remove electrical connector (5) at top of EGR valve solenoid. Remove tube ...

Question about Mazda MAZDA6

2 Answers

...egr 2.0 ghia model You don't You replace it Remove the air cleaner outlet tube. Detach the EGR tube (Fig. 1). Disconnect the EGR vacuum tube. Remove the EGR valve (Fig. 2). Remove and discard the EGR ...

Question about Mazda MAZDA6

2 Answers

egr valve dodge durango replacing the egr valve on 2005 dodge durango if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the ...

...replace the egr valve in a 1997 chrysler concorde lx Chrysler Concorde 1993-1997 3.5L MFI 6cyl Exhaust Gas Recirculation System Operation This system reduces the amount of oxides of nitrogen (NO x ) ...

Question about Mazda MAZDA6

3 Answers

replace EGR valve. Valve looks a bit like a flying saucer from the top, 2-3 inches across. Once removed, clean the tube out with wire brush to ensure proper operation of new unit. Make sure to replace

Not finding what you are looking for?
2004 Mazda 6 Logo

1,117 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 Mazda Mazda6
2003 Mazda Mazda6

454 Questions

2005 Mazda 6
2005 Mazda 6

386 Questions

2006 Mazda 6
2006 Mazda 6

293 Questions

2007 Mazda MAZDA6
2007 Mazda MAZDA6

74 Questions

2008 Mazda MAZDA6
2008 Mazda MAZDA6

48 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...