...6 broke off. It still worked from the drivers side, but I had the switch replaced anyway to give control back to the passenger side. The switch was replaced, all worked fine for two weeks, then the ...
No spark in '05 Mazda 6 Switched bad engine (2.3L 4 cylinder) , kept old wiring harness. Replacement engine had one individual coil pack mounted on side of head, which was removed. Used individual ...
...6 4cyl AT Idles high after driving a while. The car will not slow down, if you press on trottle at Highway speeds car will **** fwd, and **** back when you let off. If you shut car down, and restart ...
ground wire, one of the wires has 12vdc on it and the other has 0vdc. With a meter across the two wires showing 12vdc and 0vdc I do not see any change when I activate the power trunk using the key fob
...6 manual tranny reverse lights don't work I changed the bulbs checked the fuse and checked the switch on the tranny its all good I was checking the relay under the hood and I noticed its not there ...
Question about Mazda MAZDA6
...6 cylinder automatic. It started to shift hard and jerk a couple months ago and just recently got worse. A couple days ago it jerked when I accelerated as usual, but kept jerking and the check engine ...
...6 issue. Two months ago, the terminals went bad and they were replaced. Then about a month ago, the battery died and was replaced. Last week, the battery light came on and the car nearly died on me ...
...into the wrong wire, those guys are just kids and they know nothing about what they are doing except finding a hot wire and a ground to tap into, this often in my experience this causes
...6 (2.3L 4 cyl engine).The odomerter, speedometer, and radio do not work. I am thinking this is all one related problem. Just bought the car so cannot give any history. Sometimes the speedometer will ...
1,117 questions posted
Usually answered in minutes!
454 Questions
386 Questions
293 Questions
74 Questions
48 Questions