2000 Mazda MPV "not hot" Questions

Ad

Question about Mazda MPV

1 Answer

...NOT GET HOT THE HEATER BLOWS BUT IT WONT GET HOT You might have a bad thermostat, you might just be low on coolant, and check the actual radiator, not the plastic overflow tank. If both of those are ...

Ad

Question about Mazda MPV

2 Answers

...hot? If not, then the heater core is plugged up. Otherwise, if the two tubes are hot leading to the heater core, the blend door is not opening. Also, is the radiator's cooling fan operating when it ...

Ad

...hot? I have replaced everything including the radiator. The only thing I have not replaced is the coolant reservoir Had the engine redone. Have both cooling fans working. Replaced the radiator. If ...

...loosing coolant. We changed the thermostat. The van at first was running hot still...but now it is not running hot but we are losing coolant...please help! ! check the water pump and the heater ...

Question about Mazda MPV

1 Answer

...a blend door problem, where it may be stuck in the cold position. if they are not too hot to hold then the issue is with getting the water hotter. such as a thermostat. try this and keep me

...not get hot. Replacement Cigarette lighter does not get hot. Replacement part will not stay depressed. Is there something unique about the original lighter element? there are two prongs inside the ...

not blowing hot air. The fluid level is fine even though I did have to add fluid twice but now it is full. The van was running for a while with heater on and no heat. I also can not find any leaks and

Question about Mazda MPV

1 Answer

...not for long. first check to see if both heater hoses are getting hot they go into the fire wall at the back of the engine ,after that ,you will need to check the blend air door also there is a valve ...

...HOT!) If they are not warm, then you most likely have a plugged core. A back flush will resolve the issue. If your hoses are warm, turn on the fan. One hose should go cold (or cooler than the other, ...

...not running hot but we are losing coolant...please help! ! need to presurice the system to see the leak The coolant is a pressurized system to maintain a higher boiling point. A leak in the ...

Not finding what you are looking for?
2000 Mazda MPV Logo

1,069 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Mazda MPV
2001 Mazda MPV

458 Questions

2003 Mazda MPV
2003 Mazda MPV

413 Questions

2004 Mazda MPV
2004 Mazda MPV

309 Questions

2002 Mazda MPV
2002 Mazda MPV

262 Questions

1997 Mazda MPV
1997 Mazda MPV

128 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...