2000 Mazda MPV "coil pack" Questions

...valve covers and you should see 3 different sets of wires that are pluged into the coil pack. Each coil pack are normaly held in by 2 10mm bolts. Take those off and the spark plugs are down that ...

Coil Pack on 2008 Mazda MPV I replaced the spark plugs and it looks like #2 plug was not firing, I was hoping that the new plugs would fix it but it didn't. I am going to try to replace the coil pack.

Is the coil pack what the spark plug wires go into on 2000 mpv Yes....one end of the plug goes to the spark plug in the head and the other end plugs into the coil pack.

...the wires, something happened to the coil pack or the crank/cam sensors.  Or a fuse or relay for the coil pack.I would probably try an old plug wire to make sure, then check the coil for

...coil packs for each cylinder, simply remove each coil pack hold down bolt and remove coil, plugs are underneth coil packs, you will need a long extension and a 5/8 spark plug socket to remove

...Spark plug, or spark plug wire on cylinder 4 #4 cylinder could be faulty plug wire or plug or coil pack,I would start with plugs and plug wire and if it persist change coil pack I hope this helps ...

were is the #4 coil pack located on the engine on 2003 mazda mpv minvan. were are the coils

...the coil pack and the crank sensor and the timing cause you could have a bad timing belt also go to your local library and there you can get pictures and diagrams showing you detailed ...

coil pack, as it sounds as the coil pack is over heating & then shutting off, which is why it will only restart after cooling & then upon restart it over heats again. As these are very sensitive & can