1999 Mazda Protege "replacing rear sway bar bushing" Questions

...rear. You have a solid axle I would take to get a sec. opinion, for sure, A sway bar is mostly used for racecars for distrubate wight. There is a lot with them but not a front wheel drive, I could be ...

...sway bar is in the rear. I think I'm going to a junkyard to see if I can find the whole assembly and how much it would cost. Should I take it to the dealer or just to a local mechanic or machine shop ...

rear sway bar links and bushing on Dodge Durango 07 Joleen, Replacing the sway bar bushings and links is not that difficult. They can be ordered from any auto-parts store, Amazon or eBay. However, you

...rear sway bar bushing chevy 2005 malibu clunking noise The sway bar bushings are easily replaceable ....remove the 2 bolts that hold the mount and remove the old/damaged bushing.....slip the new one ...

...rear sway bar bushings go out causing it. To do that I would suggest just replacing the sway bars entirely cuz it's easier than replacing the bushings because the new sway bars come with new bushings ...

...wump, wump Check the rear Sway Bar Links, if they are sloppy, rusted or damaged, replace them first. Check rear Sway Bar Bushings, if bad, replace and retest. Possible bad Shock Absorber or

sway bar) is mounted in rubber isolator bushings and connects the rear struts through links. Note that the fuel tank must be removed to remove the stabilizer bar. CAUTION OFF. The fuel system pressure

...rear end sways side to side around 60 to 70 mph or when the wind is blowing pretty hard. changed the bushings on the sway bar. the r and f shocks. inst ssway b link kit. was thinking of changing all ...

sway/stabilizer bar at the rear of the engine/transmission subframe. The bushings wear and allow the bar to clunk, especially on small bumps and uneven road. I have found that not only do the bushings

...rear sway bar links or bushing are starting to go ? Does the entire sway bar need replacing or can I just replace the right and left side links and attached bushings ? Yes this sounds like A sway bar ...