1999 Mazda Protege "fix fan" Questions

temperature sensors. One for the gauge or light on the dash and one for the fan relay. Check and make sure the sensor hasn't went bad or come unplugged. If these don't fix it the fan itself may be bad

...fan switch, it completes the circuit when the water temp get up to N.O.T normal operating temperature and turn the fans on, try changing radiator fan switch. Good luck and thanks for using FIX ...

...fan comes on just fix the connection.But when you check for power at the blower motor and don't have power then check the fan relay if it does'nt click when you turn it on then ...

...just stopped working. I have no heat. Do I need to replace the motor? put new temperature sensors in the car and that should fix your problems. the temp sensors control when the fan kicks on and

fix that i can do myself just by going into an auto parts store. otherwise, any other insight would be appreciated. I assume your fan is not turning which can be heard with just the key on at low. You

...fix myself? Check the fan blower resistor mounted in the under dash blower case. Mazda had pretty well designed systems and are user friendly. The resistors are a fairly common issue. Make sure also ...

...fan doesn't seem to work. it's been out for quite a while, and was wondering if the problem can be fixed without a repair shop, and if it can be done by myself. Find the location of the fan motor. ...

fixed every possible cause but still overheating checked water pump for circulating the coolant?checked the radiator if the coolant circulated correctly?thermostat renewed?thermo switch  checked ...

...You probably have a bad fan switch. I had the same issue and had it diagnosed and replaced. It fixed the problem, but it seems to be coming back less than 2 years

...the dash? It's not the AC button but the fan switch. Had mine replaced with the same issue and it fixed the problem. It's beginning to fail again less than 2 years later