1999 Mazda Protege "air intake" Questions

Ad

Question about Mazda Protege

1 Answer

...air intake path. Spray it with brake or carb cleaner and let it air dry do not touch it with your hands, Reset the code by disconnecting the negative terminal of the battery for a few minutes and see ...

Ad

...air entering the intake behind the MAF sensor causes improper air/fuel mixture which could cause your misfire. if all is well it could be in need of a tune up plugs/wires (don't use aftermarket wires ...

Ad

...air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the ...

Question about Mazda Protege

1 Answer

air intake tube this can also cause the other fault. You first need to check the clamps are tight on the air intake tube yu replaced. then spray aerostart around intake tube & listen for change of

Question about Mazda Protege

1 Answer

2003 Mazda protege surge in shifting well check your fuel pressure the pump may be weak,or you have a intake air leak,spray some wd/40 or carb spray around the base of the intake

...to die. i have to put it in neutroll and give it as too keep it from dieing. sounds like a air intake problem, check you mass airflow sensor, and idle air control, also check for leaks in the air ...

Question about Mazda Protege

2 Answers

...intake manifold and vacuum hose. Bad Idle Air Control Motor (IAC) Low compression (170 psi + is OK) Start cleaning and repair these trouble spots and see is there any improvement. ==== For more ...

...peddle. While you are looking at the top of the moter, you should see the linkage at the trottle body moving. Tha linkage is part of the trottle body. TROTTLE BODY IS WHERE THE AIR INTAKE IS MOUNTED ...

...intake manifold air control actuator bank 1--circuit low ===causes --wiring short to ground--intake manifold air control actuator ---intake manifold air control solenoid There may be a connection to ...

...air filter to the intake for rips or holes. If rips exist, this would allow air to bypass the filter and mass air flow sensor and will lead to a check engine light appearing. The code would read "too ...

Not finding what you are looking for?
1999 Mazda Protege Logo

399 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...