2002 GMC Sonoma Extended Cab "removing spider injector" Questions

...injector spider at 82,000 mi. because 1 of 6 injectors failed. this was a part that cost more than $400.00 plus installation. insane engineering that cost me , the consumer , outrageous money to say ...

...spider injector, coil, coil pick up, No manifold or vac leaks. 2 yr old fuel pump, new battery. Has dist. shaft removed and inspected. Told there is no EGR valve on this model to replace. New fuel ...

Rotor button 11. Distributor cap Smell of the oil,to see if the fuel injector(spider)is leaking into the crank case,if so,the intake will have to be removed to repair the problem,oh,and change the oil

...injector spider system, it only has 10 lbs of pressure, won't start. I understand it needs 50lbs of pressure to start. Where might the pressure restriction be? The fuel filter is clean. Wondering if ...

...spider unit" The injectors can be replaced separately. Also sometimes it's the pressure regulator that's bad, and leaking so check for that too.you can check the injector spray pattern if you are ...

...spider, but not out out of the injectors. i have no idea what would cause this. but it will run on starting fluid. Check for injector pulse at the plug going into the intake. Front of intake, drivers ...

injector spider. You can remove the plenum tuning device at the top of the manifold and look in with a flashlight and see how one side of the intake is washed and wet with fuel to confirm this. To fix

...and now gas filter Check the oil,smell the oil,to see if there is a gas smell to it,if so,the injector spider,has a broken injector line.The intake will have to be removed to replace the

...spider assembly which includes the injector, regulator, and poppet lines. I would go the extra mile and replace the fuel inlet/outlet lines as well since they are probably brittle and could crack or ...

...has what is reffered to as a spider injector. meaning it has a central injector and 8 nozzles. you will need to remove the upper intake to replace the injector. this will be the black plastic