2000 GMC Sierra "magnet transmission pan" Questions

you change the transmission filter and refill fluid in a 2000 gmc sierra pickup? Remove the trans pan,change the filter,clean pan and magnet,install new gasket and refill with correct fluid. (Dex/Merc

...transmission shifts fine. rec check fluid first. If trans fluid hasn't been changed in last 30,000 miles change fluid, filter and pan gasket. At that time inspect for foreign materials in bottom of ...

...magnet in my transmission pan i need to know where it came from and how to replace it This round magnet is supposed to stay in the bottom of the Transmission pan to catch any metal flakes, shavings ...

...transmission. Thanks for the tip! :-)Change the ATF fluid and pan filter and put on a new pan gasket once a year/12,000 miles. If you have a 4x4 (4WD) and do alot of offroading or if you do a lot of ...

transmission pan magnet Replaced the transmission filter on my 2004 Explorer Sports Trac - #5R55E Transmission - and now I'm not sure exactly where the magnet should be placed in the bottom of the pan

...Aluminum Transmission Pan It's painted black and I am looking for a magnet (assumes if it sticks it's steel) but untill I find one I figured I would ask steel pan and it magnet is in the inside of ...

...magnet. Remove the oil filter. Remove the filter neck seal. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed. Clean the transmission case and the oil pan gasket ...

...transmission. If equipped, don't forget to install the pan magnet. Tighten the pan attaching bolts as follows: C3 and C5 Transmissions: 12-16 ft. lbs. (16-22 Nm) A4LD Transmissions: 8-10 ft. lbs. ...

transmission pan. I always remove the return hose(which is driver side on rad base) and put into a container. Put e-brake on start vehicle and put into drive, this will drain fluid out of transmission

...transmission. Discard the old gasket. Clean the magnet in the pan. Clean the pan and the mating surfaces with a solvent and a clean, lint-free cloth. Replace the magnet and allow the pan to air dry. ...