...GT I'm trying to remove the speed sensor on my 94 Ford Mustang GT. Does anyone have any advice on how to reach it? Remove the trans cross member and let the trans drop down (use a floor jack), then ...
...GT and I don't know where my Chilton's manual is. I am hoping someone can help. I could probably do it without, but better safe than sorry. Thanks. peice of cake remove hose and plastic coverings on ...
how do ireplace the up an down switch on2001 mustang gt how to remove the switch do you mean the turn signal switch?
GT AC DONT WORK THE CLUTCH ON THE COMPRESSOR WONT KICK ON WHEN I TURN THE AC ON AIR BLOWS BUT NOT COLD check freon in system if not enough freon compressor wont kick in how o remove a air modular from
...air modular from a 96 mustang gt how to remove a air modular the idle air control modulator is located on the side of the intake manifold. use an 8mm socket and ratchet to remove and reinstal Good ...
...remove stripped stud and nut I've got a Ford mustang GT with 20 inch wheels on it, the right rear wheel is flat. I manage to remove the 4 four nuts perfectly but the 1 is stripped it rotates ...
...gt Disconnect the battery ground cable. For additional information, refer to Section 414-01 . Raise and support the vehicle. For additional information, refer to Section 100-02 . Remove the red ...
...gt Remove engine. Remove oil pan. Remove oil pump. You have to remove the oil pan, if the cross member is in the way loosen up the motor mounts and jack up the engine to removed the oil pan. Then ...
how to change taillight on 2007 ford mustang gt convertible Open trunk, pull back any trim & if you don't seethe lamp socket, you will see nuts to remove the tail light housing from the body
huge oil leak on driver side of my 2000 mustang gt oil leaks from the driver side but not from the valve cover or oil pan. Also, it only leaks while running. 2000 mustang gt 4.6 as removing the head ...
621 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions