...transmission is covering the bolts on one end of the pan , i cannot see the bolts let alone get to them , how do i get to the bolts to remove them and remove the oil pan ???? I do not have a picture ...
...transmission if I remove it? Your advise is greatly appreciated. TO answer all your questions, the red oring is for the oil pump pickup tube, one bolt will fix that, RTV sealet is used in the ...
...transmission. One bolt held it in I think. Had to use a long extension, and a socket, and remove the drivers side front wheel and go in thru there. Put it on snug only. Too ...
...transmission side that goes to the mount bracket on the driver side wheel well underneath the battery. If the alternator still need to be replaced, then pinch and remove connector from the rear and ...
...to get to the speed sensor on the transmission for replacement It's at the back of transmission,to remove,disconnect electrical connector,get wrench and unscrew and remove.Here's what it looks
remove a Transmission from a 2000 Grand Am? Do I have to remove the motor? if your asking me how to replace transmission then you answer your own question NO.adrian,,,, They are designed to be done on
...2000 grand am You must be referring to the transmission, There is no dip stack anymore. The level is checked by removing a plug in the transmission while the engine is running. Add fluid until it ...
where is shift solenoid on chrysler grand voyager 2001 All the transmission shift solenoids are located inside the transmission, you must remove the pan and they are attached to the valve body.
2000 Grand am how mant qts of transmission fluid is needed if you have just removed pan (if you changed filter) 6.9 quarts for and overhauled trans 9.5 quarts dry trans 12.9 quarts
do you have to drop the subframe to change the transmission in a 2000 grand voyager No. But you have to remove the plate under it.
2,105 questions posted
Usually answered in minutes!
2,271 Questions
1,337 Questions
1,299 Questions
1,150 Questions
1,016 Questions