2005 Dodge Caravan "fuse turn blower motor" Questions

...blower motor fuse located in the underhood fuse block. There should be power at the dark blue wire at the blower motor with the key on and the fan speed set to any position. here's a how to article I ...

...2 wires for the blower motor also with ignition on without running the engine. let me know how that turns out for the rest of the instructions heater blower stop working i check fuse good motor its ...

...fuse,related to turn signals and blower motor. check your blinker switch/module mounted close to the fuse box and the blower motor for shorts, in rare cases a turn signal lamp can blow out and the ...

...i tried to start it with the remote the heater blower motor and turn signals worked fine now i uninstaled the remote starter now my turn signals and blower motor wont work any sugestions check ...

turn off sometimes and not come back on. So, I checked the fuse and the relay that is located with the other fuses and relays. They were fine, so I replaced the resistor. Now, I can change the speeds.

...turn on and the aculator does move when you change postion on dash . you need to go to autozone and get a haynes book on your van, there is alot of steps in pulling your heater motor, why are you ...

is grounded. So therefore if you then have power and ground to the motor you then need to replace it.Not an easy task on these model years. Sure hope it's just a fuse for you. Replace the blower motor

...fuse? Hi my name is Allen! The 2000 year model has a problem with the blower motor wiring burning up. This causes the blower motor to turn on and off sometimes. FIX: You can buy a pigtail wiring and ...

...blower motor with the palm of your hand,if it starts back blowing,then this is the problem. Chrysler uses plastic vacuum tubes to operate the dash systems(vents). As you go up a hill the motor rocks ...

...fuse, or maybe a resistor. i have to turn the heat controller on high to get heat. if i turn it on low nothing happens, no noise, no heat. please help! You need a blower motor resistor,and the heater ...